请教各位大侠：ADK2.0编译出现以下错误--Unable to query BlueCore over SPI

carlover · 发表于 2012-9-2 18:44:07

想请教各位坛里的前辈：

我在做ADK2.0的编译仿真的时候，遇到Unable to query BlueCore over SPI的错误，并且我运行BlueFlash和PStool均没有问题。请问这个问题原因是什么呢？

先谢过了！

sun_shine · 发表于 2012-9-4 09:23:05

兄弟，这个问题解决没呢，我也遇到这个问题，真是摸不着头脑呀，能说说解决方法吗

force_miao · 发表于 2012-10-6 09:30:12

我也遇到同样的问题，怎么解决的？

Tianhw · 发表于 2012-10-10 15:42:13

Check SPI cable and power to development board.
Development boards with Lithium Ion batteries often have difficulty charging from completely flat. If this has happened try charging the battery overnight, or remove the battery and recharge with an external charger.
The Debug Transport used by project may require updating. Select Debug and Transport... from the xIDE menu. Ensure that the setting is correct, press Next > and then Finish.
If the main board connects to the host via a DEV-PC-1309 interface board, then check the following switches and jumpers; On/off should be on (This is power for the interface board), Hold should be on, VIF jumper should be 1V8, RST/RSTB jumper should be RST.

青蛙王子j · 发表于 2012-11-14 13:01:57

一楼的位置好啊..

gavinfre · 发表于 2016-6-9 16:38:56

这个不太清楚

		自动登录	找回密码
密码			注册